![]() ![]() Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD. When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once you have updated your drive, reboot to make sure that all modifications take effect. However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version. The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. Close the wizard and perform a system reboot to allow changes to take effect. Follow the instructions displayed on-screen. Read and agree with the License Agreement to proceed with the installation process. Allow Windows to run the file (if necessary). Locate and run the available setup file. ZIP archives: Extract the file and enter the newly-created directory. Save all work in progress and close open applications. ![]() Click the Download button and follow the steps for saving the package on your computer. To install this package please do the following: Even though other OSes might be compatible, we do not recommend applying this release on platforms other than the ones specified. ![]() If your computer is currently running an older version of this utility, updating may fix problems, add new functions, or expand existing ones. This package contains the files needed for installing the Crucial SSD Storage Executive Utility. Verify your SSD’s model number for warranty claims Monitor your SSD’s operating temperature and overall health Enable the Momentum Cache feature and make many SSD operations up to 10x faster ![]()
0 Comments
![]() Add a remote by clicking the Add Remote button. Step 8 − The remote will need to be added. Then, select Push from the Pull, Push menu option. Step 7 − Within the Source Control panel, click the Overflow button (with the ellipsis). Step 6 − Click on "Yes" after writing a commit message, press the "Ctrl + Enter" key, and ![]() Once you have clicked on "Source Control", click on "Initialize Repository." Step 4 − Open the folder you wish to push in Visual Studio code. With this URL, we can push code to this repository from Visual Studio Code. Copy the URL of your repository once it has been created. Create a repository by entering a name and clicking the Create repository button.Ĥ. Start a new repository by clicking the + icon in the top right corner.ģ. As a first step to create a repository you need to log in to your GitHub account.Ģ. It should be installed using the default settings.Ĭreating an account on GitHub is the next step. You can find the right download for your operating system here. GitHub uses Git as its underlying technology. Git must first be installed on your computer before you can use it. VSCode offers a highly customizable user interface, allowing users to choose from a variety of theme options, keyboard shortcuts, and settings. VSCode is a developer-focused editor written in Ruby on Rails, built using Github's Electron Framework, and with a wealth of extensions to assist you in almost any area of development. With free, open-source software, you can debug, use Git version control, highlight syntax, and add snippets to your code. Visual Studio Code (VSCode) is one of the most popular Code Editors/IDEs of today due to its simple and elegant design as well as its powerful features and performance. The GitHub platform makes it easy to collaborate and work on projects with others from anywhere in the world. It is also incredibly simple to collaborate on GitHub on strings of code, so even the smallest parts of a program can be perfected. GitHub not only makes it very easy to create new versions of information without disrupting the current versions of the software, but it also offers a wide range of other features that enable collaboration between development teams.Ī new addition to a program can be easily incorporated into an existing program after it has been completed, for example. Along with a number of useful features that are offered by GitHub, it also provides a host of other features that facilitate collaboration between development teams on projects in a way that is very comfortableįor them to use. It is a platform that fosters collaboration between developers and facilitates communication and collaboration between them as well. What is GitHub?Ī big part of the popularity of GitHub is because of the large developer community that it has. Let's take a look at GitHub and Visual Studio in brief before you start working with them. This blog will explain how to publish your Visual Studio Code code to Github. In order for different modules and versions to be operated by different teams, version control is indispensable for every software project. New Project from Remote location - creating a new PHP project that is initialized with files from a remote location, and setups both-way synchronization.When editing code, reviewing changes, and submitting to GitHub, developers often switch between multiple windows.New Project from Composer Package - creating a new PHP project from a composer package.New Project - creating a new PHP project, either empty or from a template.In case your folder contains composer.json file and you are missing the required packages defined in the file, the following dialog will appear, asking for your permission to download the package into your project. phpproj) in the folder you specified, containing all the files within this folder. Choose a name for your new project, the root folder containing the existing code, and a filter to ignore specific file types.Ĭlick Finish, Visual Studio will create a new project (. ![]() ![]() Open File | New | Project From Existing Code. The wizard will guide you through the process of creating the project in the specified location. In File / New / Project, choose the PHP Project from Existing code project template. Project From Existing Code "Project Template" If there is already a folder with existing PHP code files, a new Visual Studio project can be created right from there. ![]() ![]() ![]() For the new model B with 512 MB RAM initially there were new standard memory split files released( arm256_start.elf, arm384_start.elf, arm496_start.elf) for 256 MB, 384 MB and 496 MB CPU RAM (and 256 MB, 128 MB and 16 MB video RAM). Comparatively the Nokia 701 uses 128 MB for the Broadcom VideoCore IV. 128 MB was for heavy 3D, possibly also with video decoding (e.g. 224 MB was for Linux only, with just a 1080p framebuffer, and was likely to fail for any video or 3D. The default split was 192 MB (CPU RAM), which should be sufficient for standalone 1080p video decoding, or for simple 3D, but probably not for both together. On the first 256 MB release model B (and Model A), three different splits were possible. On the older beta model B boards, 128 MB was allocated by default to the GPU, leaving 128 MB for the CPU.Model A and Model B are cultural references to the original models of the British educational BBC Micro computer, developed by Acorn Computers, who originally developed the ARM processors (the architecture of the Raspberry Pi) and operating system RISC OS, which will also be able to be run on the Raspberry Pi (version 5.17).SD / MMC / SDIO card slot (3.3 V card power support only)ġ0/100 Mbit/s Ethernet ( 8P8C) USB adapter on the third port of the USB hub Ĩ × GPIO, UART, I☬ bus, SPI bus with two chip selects, I²S audio +3.3 V, +5 V, ground Ĩ5.60 mm × 56 mm (3.370 in × 2.205 in) Īrch Linux ARM, Debian GNU/Linux, Gentoo, Fedora, FreeBSD, NetBSD, Plan 9, Raspbian OS, RISC OS, Slackware Linux ![]() ģ.5 mm jack, HDMI, and, as of revision 2 boards, I²S audio (also potentially for audio input) MPEG-2 and VC-1 (with license ), 1080p30 h.264/MPEG-4 AVC high-profile decoder and encoder ĥ12 MB (shared with GPU) as of 15 October 2012Ģ (via the built in integrated 3-port USB hub) Ī CSI input connector allows for the connection of a RPF designed camera module Ĭomposite RCA (PAL and NTSC), HDMI (rev 1.3 & 1.4), raw LCD Panels via DSI ġ4 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards. Specifications īroadcom BCM2835 ( CPU, GPU, DSP, SDRAM, and single USB port) ħ00 MHz ARM1176JZF-S core ( ARM11 family, ARMv6 instruction set) In case of issues, the overclocking settings can be reduced until stability is restored, or one can put an appropriately sized heatsink on it. Via the Raspbian Linux distro the overclocking options on boot can be done by a software command running "sudo raspi-config" without voiding the warranty. Most Raspberry Pi devices can be overclocked to 800 MHz and some even higher to 1000 MHz. B computers, labeled "Iridis-pi", achieved a LINPACK HPL suite result of 1.14 GFLOPs (n=10240) at 216 watts for c. The LINPACK single node compute benchmark results in a mean single precision performance of 0.065 GFLOPs and a mean double precision performance of 0.041 GFLOPs for one Raspberry Pi Ver. The Raspberry Pi chip operating at 700 MHz by default, will not become hot enough to need a heatsink or special cooling. ![]() On the CPU level the performance is similar to a 300 MHz Pentium II of 1997-1999 and the GPU however provides 1 Gpixel/s, 1.5 Gtexel/s or 24 GFLOPs of general purpose compute and the graphics capabilities of the Raspberry Pi are roughly equivalent to the level of performance of the Xbox of 2001. While operating at 700 MHz by default, the Raspberry Pi provides a real world performance roughly equivalent to the 0.041 GFLOPs. The Broadcom SoC used in the Raspberry Pi is equivalent to a chip used in an old smartphone (Android or iPhone).
![]() ![]() It has weak disinfectant properties, and it may be an effective fungicide against some organisms. Sodium bicarbonate is also used to delay combustion reactions by releasing CO 2 and H 2O when heated, both of which are flame retardants. The effect is caused by the thermal decomposition, which produces carbon dioxide gas to produce a long snake-like ash as a combustion product of the other main component, sucrose. Sodium bicarbonate is one of the main components of the common "black snake" firework. Baking soda is alkaline the acid used in baking powder avoids a metallic taste when the chemical change during baking creates sodium carbonate. Many forms of baking powder contain sodium bicarbonate combined with calcium acid phosphate, sodium aluminium phosphate, or cream of tartar. Baking powder īaking powder, also sold for cooking, contains around 30% of bicarbonate, and various acidic ingredients which are activated by the addition of water, without the need for additional acids in the cooking medium. Since the reaction occurs slowly at room temperature, mixtures (cake batter, etc.) can be allowed to stand without rising until they are heated in the oven. Additionally, in the absence of acid, thermal decomposition of sodium bicarbonate also produces sodium carbonate, which is strongly alkaline and gives the baked product a bitter, "soapy" taste and a yellow color. When used this way on its own, without the presence of an acidic component (whether in the batter or by the use of a baking powder containing acid), only half the available CO 2 is released (one CO 2 molecule is formed for every two equivalents of NaHCO 3). Heat can also by itself cause sodium bicarbonate to act as a raising agent in baking because of thermal decomposition, releasing carbon dioxide at temperatures above 80 ☌ (180 ☏), as follows: 2 NaHCO 3 → Na 2CO 3 + H 2O + CO 2 Baking soda may be used together with sourdough, which is acidic, making a lighter product with a less acidic taste. The acid–base reaction can be generically represented as follows: NaHCO 3 + H + → Na + + CO 2 + H 2OĪcidic materials that induce this reaction include hydrogen phosphates, cream of tartar, lemon juice, yogurt, buttermilk, cocoa, and vinegar. ![]() ![]() ![]() When it reacts with acid, carbon dioxide is released, which causes expansion of the batter and forms the characteristic texture and grain in cakes, quick breads, soda bread, and other baked and fried foods. In cooking, baking soda is primarily used in baking as a leavening agent. The modern chemical formulas of these compounds now express their precise chemical compositions which were unknown when the name bi-carbonate of potash was coined (see also: bicarbonate). It is based on the observation that there is twice as much carbonate (CO 3 −2) per sodium in sodium bicarbonate (NaHCO 3) as there is in sodium carbonate (Na 2CO 3). The prefix bi in bicarbonate comes from an outdated naming system predating molecular knowledge. The word saleratus, from Latin sal æratus (meaning "aerated salt"), was widely used in the 19th century for both sodium bicarbonate and potassium bicarbonate. Abbreviated colloquial forms such as sodium bicarb, bicarb soda, bicarbonate, and bicarb are common. The term baking soda is more common in the United States, while bicarbonate of soda is more common in Australia, United Kingdom and Ireland. Nomenclature īecause it has long been known and widely used, the salt has many different names such as baking soda, bread soda, cooking soda, and bicarbonate of soda and can often be found near baking powder in stores. It is a component of the mineral natron and is found dissolved in many mineral springs. It has a slightly salty, alkaline taste resembling that of washing soda ( sodium carbonate). Sodium bicarbonate is a white solid that is crystalline, but often appears as a fine powder. It is a salt composed of a sodium cation ( Na +) and a bicarbonate anion ( HCO 3 −). Sodium bicarbonate ( IUPAC name: sodium hydrogencarbonate ), commonly known as baking soda or bicarbonate of soda, is a chemical compound with the formula NaHCO 3. Chemical compound Cupcakes baked with baking soda as a raising agent ![]() ![]() ![]() 1 Nuffield Department of Medicine, University of Oxford, Oxford, UK. 16 Department of Infectious Diseases and Microbiology, Oxford University Hospitals NHS Foundation Trust, John Radcliffe Hospital, Oxford, UK. ![]() 15 The National Institute for Health Research Oxford Biomedical Research Centre, University of Oxford, Oxford, UK. 14 The National Institute for Health Research Health Protection Research Unit in Healthcare Associated Infections and Antimicrobial Resistance at the University of Oxford, Oxford, UK. 13 Big Data Institute, Nuffield Department of Population Health, University of Oxford, Oxford, UK.12 MRC Clinical Trials Unit at UCL, University College London, London, UK.11 Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, University of Oxford, Oxford, UK.9 Health Improvement Directorate, Public Health England, London, UK.8 Office of the Regius Professor of Medicine, University of Oxford, Oxford, UK.7 Office for National Statistics, Newport, UK.6 Department of Infectious Diseases and Microbiology, Oxford University Hospitals NHS Foundation Trust, John Radcliffe Hospital, Oxford, UK.5 The National Institute for Health Research Oxford Biomedical Research Centre, University of Oxford, Oxford, UK. ![]()
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |